CYCO Platinum Series Hydroponics Nutrients & Additives
Glossary   
Search  
   
Browse by Category
Cannaversity .: Cannabis Cultivation .: Lighting & Electrical .: How do I convert watts to amps and amps to watts?

How do I convert watts to amps and amps to watts?

The formula for converting Watts to Amps is : Watts = Amps * Volts

The formula for converting Amps to Watts is : Amps = Watts / Volts

 SAFETY WARNING : It is a smart Idea to only  use 80% of your the circuit breakers capacity this gives you a little leaway for error !

Common Conversions British Commonwealth and other 240 volt countries

Lights :
1000W / 240V = 4.1A
600W / 240V = 2.5A
400W / 240V = 1.7A
250W / 240V = 1.1A

Circuits :
10A * 240V = 2400W and 80% safe usage is 1920W
15A * 240V = 3600W and 80% safe usage is 2880W
25A * 240V = 6000W and 80% safe usage is 4800W
30A * 240V = 7200W and 80% safe usage is 5760W

Common Conversions North American and other 110 volt countries

Lights :
1000W / 110V = 9.1A
600W / 110V = 5.4A
400W / 110V = 3.6A
250W / 110V = 2.3A

Circuits :
10A * 110V = 1100W and 80% safe usage is 880W
15A * 110V = 1650W and 80% safe usage is 1320W
25A * 110V = 2750W and 80% safe usage is 2200W
30A * 110V = 3300W and 80% safe usage is 2640W


Remember that a circuit services more than one power outlet.
A two outlet wall plug will use only one circuit.
There will be more outlets on 240V systems per circuit than there will be in 110V systems.

 

Originally contributed by : TieDown at overgrow.com


How helpful was this article to you?

Related Articles

article How To Convert watts to amps
The calculation for watts to amps is : Watts / Voltage = amps.  240 Volt example A 400 watt ballast plugged into ordinary house current (240v) would draw 1.67 amps. 120 Volt example A 400 watt ballast plugged into ordinary house current (120v) would draw 3.33 amps. Once you have worked out the amps a...

  7-31-2007    Views: 111835   
article Charts to convert ppm/EC/CF
One of the problems with conversing with Growers in different areas and with different equipment is that CF/ppm/EC meters will express different yet very similar measurements all effectively say the same exact thing it's just a case of what measurement you use The two levels expressed at either end of the columns...

  7-31-2007    Views: 51264   



Copyright OS 2008 - 2011